4060 80W 100W CO2 Laser Engraving Cutting Machine for Stone Plastic Glass Acrylic

Short Description:

1 )Adjustable Speed and Power, Smooth and Precise Engraving and Cutting

2)USB interface, support USB dropped breakpoints continued

3 )Air Assist, Remove heat and combustible gases from the cutting surface

4 )Embedded Exhaust Fan, Easier install, Safer transport

5)Rotary Axis, Engrave any cylindrical object(Optional parts )

6)Aluminum Knife Worktable or Honeycomb Worktable.

7 ) Intuitive Control Panel, Set Speed, power, and more controls directly from the laser

8)Water Cooling and Protection System

9)Red light positioning

10)Emergency Stop Button

11)Larger Size,400′ 600mm working area

12 )The lifting platform is electric control

13)Drag-and-chain transmission line.

14)Laser focal length: 5CM

Send email to us Download as PDF

Product Detail

Product Tags

Laser head

The air pipe has been installed on it. So that dust will not contact the lens. The blown air can cool the lens and cool the material surface. Red light positioning function(Optional).

Aluminum knifework table (optional)

To process hard materials like acrylic, wood and so on.

Honeycomb worktable

1 )Small holes make sure good supporting performance which is suitable for leather. cloth and other thin soft materials.

2 )The hole of honeycomb worktable is small , so the small workpiece can be placed on the table surface to be processed

Electric Up downworktable

The height of the platform can be adjusted, freely to facilitate products of any thickness.

Features

M2 main board is a square port USB interface main board.

Laser tube

Closed Co2 laser tube, long life,stable power. Installation of reinforcement settings,the laser tube is not easy to collide and cause damage when moving the m-achine.(EFR, RECI, CDWJ, YONGLI, JOY. Optional)

X Axis can upgrade to linear guide

Special linear guide rail good stability and long service life low noise and high precision.

Product Paramenters

Model	FST 4060 laser engraving cutting machine
Working area	600*400mm
Laser type	sealed co2 glass laser tube
Laser power	40W150W/60W/80W1100W0-30000mm/min
Engraving speed	0-3600mm/min
Cutting speed	0-3600mm/min
Cutting thickness	0-20mm ( depends on materials)
Resolution rate	+0.05mm
Data transfer interface	USB2.0
Working voltage	220v+10%50hz 110410%60hz
Min shaping character	Character:22mm letter:11mm
Software	Corel Draw/ Corel Laser/ Laser DRW
Supported graphic formats	BMP PCX TGA TIF PLT CDR
Working temperature	0-45℃
Working humidity	5%-90%
Rsolution ratio	<4500DPI
Optional parts	Rotary axis,water chiller 3000/5000/5200
Machine size	>60W 1400740580mm
Machine size	40W150W 1030x740x580mm
Package	Packing in export wooden cases